Fastener Specifications
WARNING: This page is about a different car, the 2017 GMC Acadia Limited, 2017 Chevrolet Traverse, and 2017 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Seat Belt Anchor Plate Tensioner Bolt | 45 N.m (33 lb ft) |
| Front Seat Belt Retractor Pretensioner Bolt | 45 N.m (33 lb ft) |
| Front Seat Belt Retractor Pretensioner Shoulder Belt Guide Adjuster Bolt | 45 N.m (33 lb ft) |
| Front Seat Shoulder Retractor Pretensioner Anchor Bolt | 6 N.m (53 lb in) |
| Inflatable Restraint Front End Discriminating Sensor Bolt | 8 N.m (70 lb in) |
| Inflatable Restraint Instrument Panel Module Nut | 10 N.m (88 lb in) |
| Inflatable Restraint Roof Rail Module Bolts | 9 N.m (80 lb in) |
| Inflatable Restraint Seat Position Sensor Screw | 3 N.m (27 lb in) |
| Inflatable Restraint Sensing and Diagnostic Module (SDM) Bolt | 10 N.m (88 lb in) |
| Inflatable Restraint Side Impact Module Nut | 5 N.m (44 lb in) |
| Inflatable Restraint Side Impact Sensor Bolt (Front) | 9 N.m (80 lb in) |
| Inflatable Restraint Side Impact Sensor Bolt (Rear) | 9 N.m (80 lb in) |
| Inflatable Restraint Steering Wheel Module Coil Bolt | 3 N.m (27 lb in) |
| Inflatable Restraint Vehicle Rollover Sensor Nut | 10 N.m (88 lb in) |