Circuit/System Verification
WARNING: This page is about a different car, the 2020 Buick Regal TourX, 2020 Buick Regal, 2019 Buick Regal TourX, and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition - On / Vehicle - In Service Mode
- Verify DTC C056D is not set.
- If the DTC is set
- Perform all necessary programming and setup procedures for the control module: K43 Power Steering Control Module
- Verify the DTC does not set.
- If the DTC sets - Replace the component: K43 Power Steering Control Module
- Go to next step: If the DTC is not set
- All OK.
- Go to next step: If the DTC is not set
- All OK.