Fastener Specifications
WARNING: This page is about a different car, the 2020 Buick Regal TourX, 2020 Buick Regal, 2019 Buick Regal TourX, and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Power Steering Assist Motor Seal |
| Steering Gear Boot Inner Clamp |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Power Steering Assist Motor Bolt | 21 N. m (15 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Steering Gear Bolt | |
|
100 N. m (74 lb ft) |
|
45 - 60 degrees |
| Steering Gear Heat Shield Bolt | 9 N. m (80 lb in) |
| Steering Linkage Inner Tie Rod | 105 N. m (77 lb ft) |
| Steering Linkage Outer Tie Rod Nut | |
|
35 N. m (26 lb ft) |
|
30 - 45 degrees |