Power Transfer Unit Intermediate Drive Shaft Components Removal

Callout	Component Name
1	Power Transfer Unit Half Shaft Retainer Procedure Remove and DISCARD the retainer.
2	Power Transfer Unit Half Shaft Seal (O-ring) Procedure Remove and DISCARD the O-ring seal.
3	Power Transfer Unit Cover-to-Intermediate Drive Shaft Seal NOTE: Push the OD flange of the seal to remove from extension housing and shaft.
4	Power Transfer Unit Intermediate Drive Shaft Retainer
5	Power Transfer Unit Intermediate Drive Shaft
6	Power Transfer Unit Intermediate Drive Shaft Bearing Retaining Ring CAUTION: Do not nick, scratch or damage the sealing surface. The sealing surface is a machined surface. Damage to the machined surface can cause leakage.
7	Power Transfer Unit Intermediate Drive Shaft Bearing Procedure Use a press to remove the bearing from the power transfer unit intermediate drive shaft.
8	Power Transfer Unit Intermediate Drive Shaft Bearing Retaining Ring