LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2019 >> Encore Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Programming And Setup - All Systems) >> Repair Instructions >> K36 Inflatable Restraint Sensing and Diagnostic Module: Programming and Setup >> Programming an Existing or New Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming an Existing or New Control Module

WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

To program an existing or new control module, perform the following procedure:

  1. Ignition - On/Vehicle - In Service Mode
  2. Access SPS and follow the on-screen instructions for the control module: K36 Inflatable Restraint Sensing and Diagnostic Module
  3. Perform the SPS function: Programming and Setup
scientia non olet · About LEMON Manuals