LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2019 >> Encore Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Programming And Setup - All Systems) >> Repair Instructions >> K43 Power Steering Control Module: Programming and Setup >> Power Steering Control Module Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Steering Control Module Replacement

WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

If the steering column power steering control module needs to be is replaced, the power steering control module needs to be programmed with the following procedures:

  1. Connect a scan tool to the vehicle and access SPS. Refer to Service Programming System (SPS) .
  2. Perform the SPS function Power Steering Control Module - Programming and follow the on-screen instructions.
  3. Clear DTCs after completing the programming procedure.
scientia non olet · About LEMON Manuals