LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2019 >> Encore Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Programming And Setup - All Systems) >> Repair Instructions >> K43 Power Steering Control Module: Programming and Setup >> Power Steering Control Module Reprogramming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Steering Control Module Reprogramming

WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Do not reprogram the power steering control module unless directed by a service procedure or a service bulletin.

  1. Connect a scan tool to the vehicle and access SPS. Refer to Service Programming System (SPS) .
  2. Perform the SPS function Power Steering Control Module - Programming and follow the on-screen instructions.
  3. Clear DTCs after completing the programming procedure.
scientia non olet · About LEMON Manuals