If Slow to Calibrate

WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

The ideal calibration condition is driving on a 2 lane divided highway with markings on both sides of the lane. One or more of the following conditions may increase the length of time required to complete the self-calibration procedure:

Heavy traffic
Stop and go traffic
Mountain roads
Curves in roadway
Poor contrast lane markings
Botts' Dots type lane markings
Operating the vehicle at speeds greater than recommended
Driving through snow or fog, or driving directly into the sun
Camera not properly installed. Verify it is snapped into tabs and is secure. Refer to Front View Camera Replacement .

Calibration Procedure (Required for North American SPS users)

Apply the parking brake.
Place the transmission in Park (if applicable)
Install scan tool
Navigate to the module diagnostics menu
Select Frontview Camera Module
Select Configuration/ Reset Functions menu Item
Select the Frontview Camera Learn procedure and follow the directions displayed on the screen.
Drive the vehicle to complete calibration.