LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2019 >> Envision Essence, FWD >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup >> Repair Instructions >> K36 Inflatable Restraint Sensing and Diagnostic Module: Programming and Setup >> Replace and Program Control Module or Reprogram Control Module
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Replace and Program Control Module or Reprogram Control Module

To program a replacement control module, perform the following procedure:

If "K36 Inflatable Restraint Sensing and Diagnostic Module - Programming and Setup" is shown

  1. Access the Service Programming System (SPS) and follow the on-screen instructions.
  2. On the SPS Supported Controllers screen, select K36 Inflatable Restraint Sensing and Diagnostic Module - Programming and Setup and follow the on-screen instructions.
  3. At the end of programming, choose the "Clear All DTCs" function on the SPS screen.

If "K36 Inflatable Restraint Sensing and Diagnostic Module - Programming and Setup" is not shown

  1. Access the Service Programming System (SPS) and follow the on-screen instructions.
  2. On the SPS Supported Controllers screen, select K36 Inflatable Restraint Sensing and Diagnostic Module - Programming and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select K36 Inflatable Restraint Sensing and Diagnostic Module - Setup and follow the on-screen instructions.
  4. At the end of programming, choose the "Clear All DTCs" function on the SPS screen.
scientia non olet · About LEMON Manuals