Fastener Specifications
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Battery Hold Down Bolt | 22 N.m (16 lb-ft) |
| Battery Hold Down Retainer Bolt | 9 N.m (80 lb/in) |
| Battery Negative Cable Bolt @ Transfer Case (LFY) | 22 N.m (16 lb-ft) |
| Battery Negative Cable Ground Nut (LFY) | 9 N.m (80 lb/in) |
| Battery Negative Cable Nut @ Battery Sensor | 11 N.m (97 lb/in) |
| Battery Negative Post Clamp Nut | 4.5 N.m (40 lb/in) |
| Battery Positive and Negative Cable Conduit Bolt (LFY) | 9 N.m (80 lb/in) |
| Battery Positive Cable Nut @ Starter (LFY) | 12.5 N.m (111 lb/in) |
| Battery Positive Post Clamp Nut | 4.5 N.m (40 lb/in) |
| Battery Tray Mounting Bolt | 22 N.m (16 lb-ft) |
| Engine Wiring Harness Junction Block Nut | 16 N.m (12 lb-ft) |
| Fuse Block Nut (Large) | 16 N.m (12 lb-ft) |
| Fuse Block Nut (Small) | 9 N.m (80 lb/in) |
| Generator Fastener (LFY) | 12.5 N.m (111 lb/in) |
| Generator Mounting Nut (LFY) | 58 N.m (43 lb-ft) |
| Generator Mounting Stud (LFY) | 9 N.m (80 lb/in) |
| Starter Heat Shield Fastener (LFY) | 9 N.m (80 lb/in) |
| Starter Mounting Bolt (LFY) | 58 N.m (43 lb-ft) |