Circuit/System Testing
NOTE:
- This DTC may be stored as a history DTC without affecting the operation of the control module.
- If stored only as a history DTC and not retrieved as a current DTC, do not replace or reprogram the control module.
DTC U3000 with failure type byte 02, 16, 17, 1C, 29, 42, 45, 49, or 63
- Verify that the DTC is not set with FTB 42, 44, 45, 46, 47, 48, or 49.
- If the DTC is set
Replace the K182 Parking Assist Control Module.
- Go to next step: If the DTC is not set
- If the DTC is set
- All OK.
DTC U3000 with failure type byte 46, 51, or 57
- Ignition ON.
- Verify that the DTC is not set with FTB 46, 51, or 57
- If the DTC is set
- Program the K182 Parking Assist Control Module.
- Verify the DTC does not reset.
- If the DTC resets, replace the K182 Parking Assist Control Module.
- Go to next step: If the DTC does not reset
- All OK.
- Go to next step: If the DTC is not set
- All OK.
DTC U3000 92
- Verify that the DTC is not set with FTB 42, 44, 45, 46, 47, 48, or 49.
- If the DTC is set
- Clear the DTC.
- Operate the vehicle and verify that the DTC does not reset.
- If the DTC resets, replace the K182 Parking Assist Control Module.
- Go to next step: If the DTC does not reset
- All OK.
- Go to next step: If the DTC is not set
- All OK.