Circuit/System Verification
- Ignition - On/Vehicle - In Service Mode
- Operate the component: S13D Door Lock Switch - Driver - Lock Switch & Unlock Switch
Verify the component works as specified: Door Lock Switch Indicator = On and Off
- If not the specified state
Refer to Circuit/System Testing - Test 1
- Go to next step: If the specified state
- If not the specified state
- Operate the component: S13P Door Lock Switch - Passenger - Lock Switch & Unlock Switch
Verify the component works as specified: Door Lock Switch Indicator = On and Off
- If not the specified state
Refer to Circuit/System Testing - Test 2
- Go to next step: If the specified state
- If not the specified state
- All OK.