LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2022 >> Encore AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Cooling System) >> Specifications >> Fastener Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fastener Specifications

WARNING: This page is about a different car, the 2022 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components

NOTE:

All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. 

Application
Engine Coolant Air Bleed Pipe Gasket
Engine Coolant Thermostat Housing Gasket
Engine Oil Cooler Gasket
Engine Oil Cooler Seal
Water Outlet Gasket
Water Outlet Seal
Water Pump Gasket
Water Pump Outlet Pipe Gasket
Water Pump Seal
Reusable Threaded Fastener Tightening Specifications

NOTE:

All fasteners listed in this table can be reused after removal. 

Application Specification
Metric (English)
Air Conditioning Condenser Bolt 9 N.m (80 lb in)
Auxiliary Water Pump Bracket Bolt 8.5 N.m (75 lb in)
Engine Coolant Fan Bolt 5.1 N.m (45 lb in)
Engine Coolant Thermostat Housing Bolt 8.5 N.m (75 lb in)
Engine Coolant Thermostat Housing Pipe Bolt 9 N.m (80 lb in)
Engine Oil Cooler Coolant Hose Bolt-Lower 22 N.m (16 lb ft)
Engine Oil Cooler Coolant Hose Bolt-Upper 9 N.m (80 lb in)
Engine Oil Cooler Hose Bolt 9 N.m (80 lb in)
Engine Oil Cooler Hose Stud 22 N.m (16 lb ft)
Radiator Air Lower Baffle Bolt 2.5 N.m (22 lb in)
Radiator Surge Tank Bolt 9 N.m (80 lb in)
Radiator Upper Bracket Bolt 9 N.m (80 lb in)
Radiator Upper Bracket Nut 9 N.m (80 lb in)
Thermostat Bypass Pipe Bolt 8.5 N.m (75 lb in)