LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2023 >> Enclave Premium, FWD >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup >> Repair Instructions >> K124 Active Safety Control Module: Programming and Setup >> Replace and Program Active Safety Control Module or Reprogram Active Safety Control Module
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Replace and Program Active Safety Control Module or Reprogram Active Safety Control Module

NOTE:

Due to continuous improvements, the on screen selections may vary from instructions below.

To program a replacement or an existing K124 Active Safety Control Module, perform the following procedure:

  1. Access the Service Programming System (SPS) and follow the on-screen instructions.
  2. On the SPS Supported Controllers screen, select K124 Active Safety Control Module - Programming and follow the on-screen instructions.
  3. Clear DTCs.
scientia non olet · About LEMON Manuals