LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2023 >> Envision Essence, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Programming And Setup) >> Repair Instructions >> B174W Front View Camera - Windshield: Programming and Setup >> Replace and Program Frontview Camera Module or Reprogram Frontview Camera Module (without UGN)
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Replace and Program Frontview Camera Module or Reprogram Frontview Camera Module (without UGN)

WARNING: This page is about a different car, the 2021 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Due to continuous improvements, the on screen selections may vary from instructions below.

To program a replacement or an existing B174W Frontview Camera - Windshield, perform the following procedure:

  1. Ignition/Vehicle OFF
  2. Access the Service Programming System (SPS) and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select B174W Frontview Camera - Windshield - Programming and follow the on-screen instructions.
  4. On the SPS Supported Controllers screen, select B174W Frontview Camera - Windshield - Setup (if this option is available)  and follow the on-screen instructions.
  5. Clear DTCs.
  6. Following B174W Frontview Camera - Windshield replacement and reprogramming, the module must be calibrated. Refer to Front View Camera - Windshield Learn .
scientia non olet · About LEMON Manuals