LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2023 >> Envision Preferred, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Driver Assistance Systems) >> Repair Instructions >> Active Safety Control Module Bracket Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2021 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5591227Courtesy of GENERAL MOTORS COMPANY

    Active Safety Control Module Bracket (1) @ Active Safety Control Module - Install

  2. GM5591225Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Install the active safety control module and bracket assembly (2) to the vehicle.

  3. Active Safety Control Module Bracket Nut (1) - Install and tighten [3x] 9 N.m (80 lb in)
  4. Connect the electrical connectors.
  5. GM5591217Courtesy of GENERAL MOTORS COMPANY

    Quarter Lower Rear Trim Panel (1) - Install - Quarter Lower Rear Trim Panel Replacement