Code P061, Cruise Control Vent Solenoid Circuit Problem: Action
PCM disables cruise control.
NOTE:
Test numbers refer to numbers on diagnostic chart.
- Checks if cruise control servo or control circuitry is faulty. Frequency should cycle between zero and a non-zero number. If DVOM stays at zero, circuit or PCM is at fault.
- Checks for short to voltage in circuit No. 403.
- Checks for open in circuit No. 451.
- Checks PCM's ability to control cruise control servo. Voltage should cycle between zero and 12 volts. If voltage does not cycle, check for open in circuit No. 403.