System Operation Check
- Move mirror select switch to left mirror position. Operate left mirror to left, right, up and down positions. Mirror should operate as commanded in all positions.
- Move mirror select switch to right mirror position. Operate right mirror to left, right, up and down positions. Mirror should operate as commanded in all positions.
- If vehicle is equipped with memory mirror option, press memory No. 1 button. A single beep should be heard and both mirrors should move to positions programmed for memory No. 1 button.
- If vehicle is equipped with memory mirror option, press memory No. 2 button. A single beep should be heard and both mirrors should move to positions programmed for memory No. 2 button.
- If vehicle is equipped with parallel park mirror option, turn ignition switch to RUN position. Move shift lever to Reverse. Right mirror should tilt downward approximately 7 degrees, or to end of travel. If mirror system does not function properly, repair by symptom. See SYMPTOM INDEX table under SYMPTOM TESTS.