Steering Column Module (SCM)

Module Information - 8 Digit GM Part Number:  This displays the part number for the SCM.

Module Information- Component Serial # 8-11:  This is the first partition of the serial number.

Module Information- Component Serial # 12:  This is the second partition of the serial number.

Data Display - Data -Motor Current:  Displays amperage. This is the current being used by the motor during operation.

Data Display - Data -Telescope Sensor:  Displays sensor feedback counts or voltage. Voltage available on scan tool through soft key in the data list.

Data Display - Data - Telescope Tilt Output:  Displays the module output command state.

Data Display -Data -Telescope Tilt Switch:  Displays switch state which are Idle, In, Out, Up, or Down.

Data Display - Data - Tilt Sensor:  Displays sensor feedback counts or voltage. Voltage available on scan tool through soft key in the data list.

Module Information- Calibration ID:  This displays the calibration or program revision level used in the PROM.

Module Information- Julian Date Of Build:  This displays the day of the year the module was built.

Module Information- PROM ID:  This displays the four digit number of the PROM incorporated into the Steering Column Module (SCM).

Module Information- Year Module Built:  This displays the four digit year of build.