Front Caliper: Notes

WARNING: This page is about a different car, the 2003 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Do not place your fingers in front of the piston in order to catch or protect the piston while applying compressed air. This could result in serious injury.

NOTE: Use clean cloths to pad interior of caliper housing during piston removal. Use just enough air to ease the pistons out of the bores. If the pistons are blown out, even with the padding provided, it may be damaged.

NOTE: Replace all the components included in the repair kits used to service this brake caliper. Lubricate the rubber parts with new Delco Supreme 11(R), GM P/N 12377967 (Canadian P/N 992667) or equivalent DOT-3 brake fluid to make assembly easier. If any hydraulic component is removed or disconnected, it may be necessary to bleed all or part of the brake system. The torque values specified are for dry, non-lubricated fasteners. Perform the service operations on a clean bench, free from all mineral oil materials.

NOTE: Required Tools: Universal Driver (J-8092) and Caliper Boot Seal Installer (J-45507).