LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2004 >> DeVille DTS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Introduction) - 4.6L >> Repair Instructions >> Camshaft Position (CMP) Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Camshaft Sensor & Retaining Bolt
    GM602301Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Inspect the camshaft sensor o-ring for wear or damage. If a problem is found, replace the o-ring.
  1. Lubricate the camshaft o-ring with engine oil.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the camshaft sensor and retaining bolt.

    Tighten:  Tighten the retaining bolt between 10 N.m (89 lb in).

  3. Reconnect the camshaft sensor electrical connector.
  4. Operate the engine and inspect the camshaft sensor for engine oil leaks.
scientia non olet · About LEMON Manuals