Removal Procedure

WARNING: This page is about a different car, the 2004 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Accelerator Control Cable & Bracket

Courtesy of GENERAL MOTORS CORP.

Disconnect the accelerator control cable (2) from the accelerator controls bracket (3).

Fig 2: View Of Throttle Body Lever & Accelerator Control Cable

Courtesy of GENERAL MOTORS CORP.

Disconnect the accelerator control cable (3) from the throttle body lever (2).

Fig 3: View Of Accelerator Control Cable & Bracket

Courtesy of GENERAL MOTORS CORP.

Disconnect the accelerator control cable (2) at the retainer (1) on the bulkhead.

Fig 4: View Of Accelerator Control Cable & Accelerator Controls Pedal

Courtesy of GENERAL MOTORS CORP.

Remove the left closeout insulator panel. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages, and Console.
Squeeze the accelerator control cable (1) cover tangs and push the accelerator control cable through the bulkhead.
Disconnect the accelerator control cable (1) at the accelerator controls pedal (3).
Remove the accelerator control cable.