LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> CTS Base, 2.8 T, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.8L - Introduction >> Repair Instructions >> Engine Coolant Temperature (ECT) Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of ECT Sensor
    GM1285193Courtesy of GENERAL MOTORS CORP.
  1. Install the ECT sensor.

    Tighten:  Tighten the sensor to 22 N.m (16 lb ft).

    2. Fig 2: View Of Coolant Temperature Sensor And Electrical Connector
    GM945424Courtesy of GENERAL MOTORS CORP.
  2. Connect the ECT sensor electrical connector.
  3. Install the shielding around the ECT sensor.
  4. Inspect and fill the cooling system as necessary. Refer to Draining and Filling Cooling System (LP1, LY7) or Draining and Filling Cooling System (LS6) in Engine Cooling.
scientia non olet · About LEMON Manuals