LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> CTS Base, 2.8 T, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.8L - Introduction >> Repair Instructions >> Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: View Of MAF Sensor
    GM1201263Courtesy of GENERAL MOTORS CORP.
  1. Turn the ignition OFF.
  2. Disconnect the mass air flow (MAF) electrical connector.
  3. Remove the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement .
  4. Remove the MAF sensor fasteners.
  5. Remove the MAF sensor and the MAF sensor seal.
  6. Discard the MAF sensor seal.
scientia non olet · About LEMON Manuals