Scan Tool Data Definitions

SCAN TOOL DATA DEFINITIONS

Active Antenna Authenticated: The scan tool displays Yes/No. The scan toll will display Yes when the active antenna has been successfully authenticated.

Active Antenna Fob 1: Than scan tool displays Present/Nor Present. Than scan tool will display Present when Fob 1 has been detected by the active antenna.

Active Antenna Fob 2: Than scan tool displays Present/Nor Present. Than scan tool will display Present when Fob 2 has been detected by the active antenna.

Active Antenna Fob 3: Than scan tool displays Present/Nor Present. Than scan tool will display Present when Fob 3 has been detected by the active antenna.

Active Antenna Fob 4: Than scan tool displays Present/Nor Present. Than scan tool will display Present when Fob 4 has been detected by the active antenna.

Battery Voltage Signal: The scan tool displays battery voltage.

Console Antenna Authenticated: The scan tool displays Yes/No. The scan toll will display Yes when the console antenna has been successfully authenticated.

Console Antenna Fob 1: Than scan tool displays Present/Nor Present. Than scan tool will display Present when Fob 1 has been detected by the console antenna.

Console Antenna Fob 2: Than scan tool displays Present/Nor Present. Than scan tool will display Present when Fob 2 has been detected by the console antenna.

Console Antenna Fob 3: Than scan tool displays Present/Nor Present. Than scan tool will display Present when Fob 3 has been detected by the console antenna.

Console Antenna Fob 4: Than scan tool displays Present/Nor Present. Than scan tool will display Present when Fob 4 has been detected by the console antenna.

Door Ajar Switch: The scan tool displays Door Closed/Door Ajar. The scan tool displays Door Ajar when the respective door is ajar.

Door Cylinder Switch: The scan tool displays Idle/Lock/Unlock/Invalid. The scan tool displays the status of the driver door cylinder switch.

Ext. Driver Door Handle: The scan tool displays Active/Inactive. The scan tool will display Active when the exterior driver door handle is pulled.

Ext. Passenger Door Handle: The scan tool displays Active/Inactive. The scan tool will display Active when the exterior passenger door handle is pulled.

Fob 1 Key Pressed: The scan tool displays No Key Press/Lock/Unlock/Remote Start/Trunk/Panic. The scan tool will display the last active key press of Fob 1.

Fob 1 Programmed: The scan tool displays Yes/No. Than scan tool will display Yes if a keyless entry transmitter is programmed in the Fob 1 slot.

Fob 2 Key Pressed: The scan tool displays No Key Press/Lock/Unlock/Remote Start/Trunk/Panic. The scan tool will display the last active key press of Fob 2.

Fob 2 Programmed: The scan tool displays Yes/No. Than scan tool will display Yes if a keyless entry transmitter is programmed in the Fob 2 slot.

Fob 3 Key Pressed: The scan tool displays No Key Press/Lock/Unlock/Remote Start/Trunk/Panic. The scan tool will display the last active key press of Fob 3.

Fob 3 Programmed: The scan tool displays Yes/No. Than scan tool will display Yes if a keyless entry transmitter is programmed in the Fob 3 slot.

Fob 4 Key Pressed: The scan tool displays No Key Press/Lock/Unlock/Remote Start/Trunk/Panic. The scan tool will display the last active key press of Fob 4.

Fob 4 Programmed: The scan tool displays Yes/No. Than scan tool will display Yes if a keyless entry transmitter is programmed in the Fob 4 slot.

Hood Closed Switch: The scan tool displays Active/Inactive. The scan tool will display Active when the hood is closed.

Hood Open Switch: The scan tool displays Active/Inactive. The scan tool will display active when the hood is open.

Ignition Mode Switch: Then scan tool displays Idle/Crank/Accy/Off. The scan tool displays the current status of the ignition mode switch.

Key Fob in Vehicle: The scan tool displays None/Fob 1/Fob 2/Fob 3/Fob 4. The scan tool will display the respective fob located within the vehicle.

Last Key Fob Used: The scan tool displays Fob 1/Fob2/Fob 3/Fob 4. The scan tool will displays the last key fob used. for any keyless entry function.

Left Door Handle Antenna Authenticated: The scan tool displays Yes/No. The scan toll will display Yes when the left door handle antenna has been successfully authenticated.

Left Door Handle Antenna Fob 1: Than scan tool displays Present/Nor Present. Than scan tool will display Present when Fob 1 has been detected by the left door handle antenna.

Left Door Handle Antenna Fob 2: Than scan tool displays Present/Nor Present. Than scan tool will display Present when Fob 2 has been detected by the left door handle antenna.

Left Door Handle Antenna Fob 3: Than scan tool displays Present/Nor Present. Than scan tool will display Present when Fob 3 has been detected by the left door handle antenna.

Left Door Handle Antenna Fob 4: Than scan tool displays Present/Nor Present. Than scan tool will display Present when Fob 4 has been detected by the left door handle antenna.

No. of Fob's Programmed: The scan tool displays 0/1/2/3/4. The scan tool will displays the number of key fobs currently programmed to the vehicle.

Passive Door Unlock Status: The scan tool displays Disabled/Authenticated Dr./Driver+Passenger/All Door Unlock. The scan tool will display the passive entry personalization selection.

Passive Door Unlock Trigger: The scan tool displays Enabled/Disabled. The scan tool will display Enabled when passive unlocking is turned on in personalization.

Rear Fascia Antenna Authenticated: The scan tool displays Yes/No. The scan toll will display Yes when the rear fascia antenna has been successfully authenticated.

Rear Fascia Antenna Fob 1: Than scan tool displays Present/Nor Present. Than scan tool will display Present when Fob 1 has been detected by the rear fascia antenna.

Rear Fascia Antenna Fob 2: Than scan tool displays Present/Nor Present. Than scan tool will display Present when Fob 2 has been detected by the rear fascia antenna.

Rear Fascia Antenna Fob 3: Than scan tool displays Present/Nor Present. Than scan tool will display Present when Fob 3 has been detected by the rear fascia antenna.

Rear Fascia Antenna Fob 4: Than scan tool displays Present/Nor Present. Than scan tool will display Present when Fob 4 has been detected by the rear fascia antenna.

Remote Start Attempts: The scan tool displays the number of attempted remote starts.

Remote Start Equipped: The scan tool displays Enabled/Disabled. The scan tool will display Enabled when all criteria to allow a remote start event have been met.

Remote Starts Remaining: The scan tool displays the number of remaining remote starts that will be allowed.

Remote Start Request: The scan tool displays Yes/No. The scan tool will display Yes when a valid remote start request is received.

Right Door Handle Antenna Authenticated: The scan tool displays Yes/No. The scan toll will display Yes when the right door handle antenna has been successfully authenticated.

Right Door Handle Antenna Fob 1: Than scan tool displays Present/Nor Present. Than scan tool will display Present when Fob 1 has been detected by the right door handle antenna.

Right Door Handle Antenna Fob 2: Than scan tool displays Present/Nor Present. Than scan tool will display Present when Fob 2 has been detected by the right door handle antenna.

Right Door Handle Antenna Fob 3: Than scan tool displays Present/Nor Present. Than scan tool will display Present when Fob 3 has been detected by the right door handle antenna.

Right Door Handle Antenna Fob 4: Than scan tool displays Present/Nor Present. Than scan tool will display Present when Fob 4 has been detected by the right door handle antenna.