LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2006 >> CTS Base, 2.8 T, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Theft Deterrent System >> Repair Instructions >> Theft Deterrent Control Module Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

    Fig 1: Identifying Theft Deterrent Control Module
    GM884916Courtesy of GENERAL MOTORS CORP.
  1. Install the theft deterrent control module onto the ignition lock cylinder case assembly.
    2. CAUTION: Refer to SIR Inflator Module Coil Caution in Cautions and Notices.
  2. Connect the connector to the theft deterrent control module.
  3. If necessary, connect the connector to the ignition lock cylinder case.
  4. Install the lock cylinder. Refer to Ignition Lock Cylinder Replacement in Steering Wheel and Column.
  5. Install the upper and lower trim covers. Refer to Steering Column Trim Covers Replacement in Steering Wheel and Column.
  6. Enable the inflatable restraint steering wheel module. Refer to SIR Disabling and Enabling Zone 3 in SIR.
  7. Program the theft deterrent system. Refer to Programming Theft Deterrent System Components .
scientia non olet · About LEMON Manuals