Remote Control Door Lock Receiver Programming and Setup

REMOTE CONTROL DOOR LOCK RECEIVER PROGRAMMING AND SETUP

Each of the following service procedures requires programming or setup procedures to be performed on the theft deterrent control module.

Remote Control Door Lock Receiver Replacement
If the remote control door lock receiver is replaced, the following procedures must be performed:
1. Keyless Entry Transmitter Programming - Method 1-Refer to Transmitter Programming.
2. Set up a new remote control door lock receiver-Refer to Programming Theft Deterrent System Components.
3. Theft Deterrent 10 Minute Relearn Procedure or Theft Deterrent 30 Minute Relearn Procedure-Refer to Programming Theft Deterrent System Components.
4. Tire Pressure Sensor Learn-Refer to Tire Pressure Sensor Learn.
5. Steering Column Lock Control Module Setup-Refer to Tire Pressure Sensor Learn .

Replacing Keyless Entry Transmitters
If a keyless entry transmitter is replaced, the following procedure must be performed:
Keyless Entry Transmitter Programming-Refer to Transmitter Programming.