October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Distance Sensing Cruise Control Module Replacement
Courtesy of GENERAL MOTORS CORP. Distance Sensing Cruise Control Module Replacement
| Callout |
Component Name |
| 1 |
Front Compartment Sight Shield Retainer (Qty: 6) |
| 2 |
Front Compartment Sight Shield Assembly
Tip:
The center sight shield needs to be removed, the side sight shields only need to be loosened. |
| 3 |
Front Fascia Assembly Retainer (Qty: 4)
Tip:
- Remove the 4 retainers to loosen the fascia assembly.
- Pull the front fascia assembly forward to gain access to the cruise control module nuts.
|
| 4 |
Cruise Control Module Assembly
Tip:
- Loosen the nuts that hold the cruise control module into the T-slots on the tie bar.
- Disconnect the electrical connector.
- Slide the module out of the T-slots on the bracket.
- Replace the module by sliding the assembly into the T-slots on the bracket and tighten.
- Verify proper alignment of the module. Refer to Control Module References
for programming and setup information.
Tighten:
9 N.m (80 lb in)
|