LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2006 >> XLR Base >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Object Detection System >> Repair Instructions >> Object Alarm Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Rear Object Alarm Detection Module & Nuts
    GM1269130Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector.
  2. Align the module to the bracket.
    3. NOTE: Refer to Fastener Notice .
  3. Install the nuts to the rear object alarm detection module.

    Tighten:  Tighten the nuts to 10 N.m (89 lb in).

  4. Install the trim assembly to the rear compartment panel stowage. Refer to Body Rear Compartment Replacement .
scientia non olet · About LEMON Manuals