LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2006 >> XLR Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Stationary Window System >> Repair Instructions >> Windshield Side Reveal Molding Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

    Fig 1: View Of Window Filler Panel Applique, Cover, Clip & Screw
    GM1001869Courtesy of GENERAL MOTORS CORP.
  1. Replace the foam sealing tape if damaged.
  2. Position the windshield side reveal molding (6) to the windshield pillar.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the windshield side reveal molding (6) screws (1) to pillar.

    Tighten:  Tighten the screws to 8.0 N.m (71 lb in).

  4. Install the windshield weatherstrip into the side retainer. Refer to Weatherstrip Side Retainer Replacement .

    Starting in the center of the pillar, working the windshield weatherstrip up and down the windshield pillar until the windshield weatherstrip is fully seated.

  5. Inspect the door window for proper sealing.
  6. Close the door.
scientia non olet · About LEMON Manuals