Trailer Brake Control Module (20 Series with JL1)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Trailer Brake Control Module (20 Series with JL1)
| Pin | Wire | Circuit | Function |
|---|---|---|---|
| 1 | 2 BK | 2150 | Ground |
| 2 | 0.5 D-BU | 7632 | 5-Volt Reference |
| 3-5 | - | - | Not Used |
| 6 | 0.5 TN | 2501 | High Speed GMLAN Serial Data Bus- |
| 7 | 0.5 TN/BK | 2500 | High Speed GMLAN Serial Data Bus+ |
| 8 | 0.5 TN | 7631 | Low Reference |
| 9 | 0.5 L-GN | 944 | Relay Feedback |
| 10 | - | - | Not Used |
| 11 | 0.5 L-GN/BK | 7633 | Integrated Trailer Brake Controller User Gain Signal |
| 12-13 | - | - | Not Used |
| 14 | 0.5 TN | 945 | Integrated Trailer Brake Relay Control Active Low |
| 15 | 0.5 PK | 239 | Ignition Voltage |
| 16 | - | - | Not Used |
| 17 | 0.5 L-BU | 5986 | Serial Data Communication Enable |
| 18-20 | - | - | Not Used |
| 21 | 0.5 TN | 2501 | High Speed GMLAN Serial Data Bus- |
| 22 | 0.5 TN/BK | 2500 | High Speed GMLAN Serial Data Bus+ |
| 23-24 | - | - | Not Used |
| 25 | 0.5 BN | 7634 | Integrated Trailer Brake Controller Redundant Manual Apply Signal |
| 26 | - | - | Not Used |
| 27 | 0.5 YE | 7635 | Integrated Trailer Brake Controller Manual Apply Signal |
| 28 | 0.5 D-BU | 47 | Solid State Relay Feedback |
| 29-31 | - | - | Not Used |
| 32 | 2 RD/WH | 4340 | Battery Positive Voltage |
| 33 | 0.5 YE/BK | 7521 | Solid State Relay Enable |
| 34-36 | - | - | Not Used |
| 37 | 0.5 L-BU/WH | 6311 | TCC Brake Signal |
| 38-47 | - | - | Not Used |
Connector Part Information
|
Terminal Part Information
|