ESCM Replacement
WARNING: This page is about a different car, the 2006 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
If the electronic suspension control module (ESCM) is replaced, the procedures must be performed in the following order:
- ESCM programming-Refer to Service Programming System (SPS) .
- Trimset procedure.
IMPORTANT:
The vehicle must be at correct trim height and on a level surface before performing trimset procedure. Refer to Trim Height Inspection
in General Suspension Diagnosis. Connect scan tool to the vehicle, turn the ignition ON, with the engine OFF and follow the on screen instruction in electronic suspension control (ESC) Special functions.