LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> XLR Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Cellular System, Entertainment System, And Navigation System) >> Description and Operation >> Radio/Audio System Description and Operation >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Radio/Audio System Description and Operation: Notes

WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

The Entertainment System on this vehicle is configured with either a base or an uplevel system. Both the base and uplevel systems contain a radio, antenna, speakers, and an audio amplifier. Satellite digital radio (U2K) is optional for all radio levels (U.S. only).

The following list shows the radios available for this vehicle:

Radio Features

Controls U2R or U2S U2V or U2X
Power Push the PWR/VOL knob to turn the radio on.
Volume The volume is adjusted by rotating the PWR/VOL knob.
Auto Volume Compensation Use the TUNE/SEL knob. Press the AUDIO button.
Seek Press the up or down arrow. Press the left or right arrow.
Scan Press the SCAN button for less than 2 seconds. Press and hold the left or right arrow for 2 seconds.
Setting Seek Sensitivity Use the TUNE/SEL knob. N/A
Presets Six AM, Six FM1 and Six FM2. Six XM1, and Six XM2 if equipped with U2K. Six AM, Six FM1, Six FM2, and six weather.
Preset Saving Press and hold desired button until an audible beep is heard.
Auto Store Presets Use the TUNE/SEL knob. From the Radio menu, press the TUNE/SEL knob.
Preset Scan Press the SCAN button for more than 3 seconds. Press and hold the left or right arrow for 4 seconds.
Home/Away Presets Use the TUNE/SEL knob. Press the Audio Setup button.
Set Clock Use the TUNE/SEL knob. From the Main Menu, press the Setup soft key.
Fade or Balance Use the TUNE/SEL knob. Press the AUDIO button.
Bass, Treble, or Midrange Use the TUNE/SEL knob. Press the AUDIO button.
Equalizer Settings Use the TUNE/SEL knob. Press the AUDIO button.
Digital Signal Processing Use the TUNE/SEL knob. Press the AUDIO button.

Each item in the list below represents topics covered in detail below.