LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2008 >> CTS 3.6 V, RWD, Automatic >> Repair and Diagnosis >> Brakes >> Anti-Lock Brake System, Traction Control System & Stability Control System >> Diagnostic Information and Procedures >> DTC C0450 >> Component Testing
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Component Testing

  1. Ignition OFF, disconnect the VES actuator harness connector terminal A and B.
  2. Measure for 2.5-10 ohms of resistance between the VES actuator terminals.
    • If not 2.5-10 ohms of resistance, replace the VES actuator.
  3. Measure for infinite ohms of resistance between each VES actuator terminals and the VES actuator housing.
    • If less than the specified range, replace the VES actuator.