Preliminary Procedure:
Remove the front driver seat. Refer to Front Seat Replacement - Bucket (without HP2)
or Front Seat Replacement - Bucket (with HP2)
. |
| 1 |
Driver Seat Adjuster Outer Finish Cover
Refer to Front Seat Cushion Outer Trim Panel Replacement (with HP2)
or Front Seat Cushion Outer Trim Panel Replacement (Manual Seat without HP2)
or Front Seat Cushion Outer Trim Panel Replacement (Power Seat without HP2)
. |
| 2 |
Driver Seat Adjuster Inner Finish Cover
Refer to Front Seat Cushion Inner Trim Panel Replacement (with HP2)
or Front Seat Cushion Inner Trim Panel Replacement (without HP2)
. |
| 3 |
Driver Seat Riser Finish Cover
Procedure:
Pull rearward to disengage the cover from the seat riser. |
| 4 |
Driver Seat Cushion Cover and Pad
Refer to Seat Cushion Trim Cover and Pad Replacement (with HP2)
or Seat Cushion Trim Cover and Pad Replacement (without HP2)
. |
| 5 |
Memory Seat Module Nut (Qty: 4)
Tighten:
9 N.m (80 lb in)
|
| 6 |
Memory Seat Module Procedure
- Disconnect the electrical connector.
- Refer to Control Module References
for programming and set-up information.
|