LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2008 >> XLR Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 4.6L (LH2) - Introduction >> Repair Instructions >> Air Cleaner Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Engine Wiring Harness Electrical Connector & MAF/IAT Sensor
    GM1857765Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the engine wiring harness electrical connector from the mass air flow (MAF)/intake air temperature (IAT) sensor.
    2. Fig 2: Air Cleaner Outlet Duct Clamp & Throttle Body
    GM1857769Courtesy of GENERAL MOTORS CORP.
  2. Remove the positive crankcase ventilation (PCV) fresh air hose from the resonator duct.
  3. Loosen the air cleaner outlet duct clamp (1) at the throttle body.
  4. Remove the air cleaner assembly.
scientia non olet · About LEMON Manuals