LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> Escalade ESV AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 516 (Wiring Systems And Power Management - Component Connector End Views - Electronic Steering Control Module X2 Through Memory Seat Module) >> Component Connector End Views >> Fuel Pump and Sender Assembly- Front
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump and Sender Assembly- Front

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Fuel Pump and Sender Assembly - Front Connector End View
GM684908Courtesy of GENERAL MOTORS CORP.
Fuel Pump and Sender Assembly- Front

Pin Wire Circuit Function
A 3 BK 2150 Ground (L96)
3 PK 1580 Low Reference (except L96)
B 0.5 TN/BK 6049 Low Reference
C 0.5 PU 1589 Fuel Level Sensor Signal- Primary
D 3 GY 120 Fuel Pump Control
Connector Part Information
  • Harness Type: Chassis
  • OEM Connector: 13521459
  • Service Connector: 19152589
  • Description: 4-Way F GT 280 Series Sealed 5.8 (BK)
Terminal Part Information
  • Pins: A, D
  • Terminated Lead: 13575403
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-4A (PU)
  • Terminal/Tray: 15304720/19
  • Core/Insulation Crimp: 4/5
  • Pins: B, C
  • Terminated Lead: 13576356
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-4A (PU)
  • Terminal/Tray: 15304719/19
  • Core/Insulation Crimp: E/5
scientia non olet · About LEMON Manuals