Scan Tool Data Definitions

WARNING: This page is about a different car, the 2007 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

8 - Digit GM Part Number: The scan tool displays the part number of the module.
Battery Voltage: The scan tool displays 0-16 Volts. The voltage measured between the module's battery positive circuit and ground circuit.
Calibration ID: The scan tool displays a 4-digit number. This number designates the calibration or program level used in the PROM.
Current: The scan tool displays 0-127.5 amps. The amount of amps used during seat operation.
Driver Heated Seat Status - CCP: The scan tool displays Off/High/Low. When the heated seat is on, the scan tool will display the status signal from the rear integration module to the climate control panel as High or Low.
Driver Heated Seat Status - RIM: The scan tool displays On/Off. When the heated seat is on, the scan tool will display the status signal from the heated seat module to the rear integration module as On.
Driver Heated Seat Sw. - CCP: The scan tool displays Idle/Pressed. When the driver heated seat switch is pressed, the scan tool will momentarily display the switch input of the climate control panel as Pressed.
Julian Date of Build: The scan tool displays a 3-digit number. This number is the day of the year that the module was built.
Load Shed Lvl. 1 Heated Seat: The scan tool displays Disabled/Enable. During a pre-determined heavy loading condition, the driver information module (DIM) will send out a class 2 message to the rear integration module (RIM) that a load shed level 1 is in effect and the scan tool will display Enable.
Load Shed Lvl. 2 Heated Seat: The scan tool displays Disabled/Enable. During a pre-determined heavy loading condition, the driver information module (DIM) will send out a class 2 message to the rear integration module (RIM) that a load shed level 2 is in effect and the scan tool will display Enable.
Pass. Heated Seat Status - RIM: The scan tool displays Off/On. When the heated seat is ON, the scan tool will display the status signal from the heated seat module to the rear integration module (RIM) as On.
Pass. Heated Seat SW. - CCP: The scan tool displays Idle/Pressed. When the passenger heated seat switch is pressed, the scan tool will momentarily display the heated seat switch input of the climate control panel as Pressed.
Passenger Heated Seat Status - CCP: The scan tool displays Off/High/Low. When the passenger heated seat switch is pressed, the scan tool will display the status signal from the rear integration module to the climate control panel as High or Low.
PROM ID: The scan tool displays a 4-digit number. This is the identification number of the PROM that is incorporated into the module.
Year Module Built: The scan tool displays a 4-digit number. This number represents the year the module was built.