LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> STS V >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Seat Heating System And Seat Cooling System) >> Repair Instructions >> Heated Seat Control Module Replacement - Front >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Memory Seat Module & Heated Seat Module Retaining Screws
    GM792015Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the heated seat control module and install the retaining screws (2).

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  2. Connect the electrical connector.
  3. Install the seat cushion. Refer to Front Seat Cushion Replacement .
  4. Refer to Control Module References for programming and setup information.
scientia non olet · About LEMON Manuals