LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> XLR Base >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Object Detection System >> Repair Instructions >> Rear Object Alarm Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Rear Object Alarm Detection Module & Nuts
    GM1269130Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector.
  2. Align the module to the bracket.
    3. CAUTION: Refer to Fastener Caution .
  3. Install the nuts to the rear object alarm detection module and tighten to 10 N.m (89 lb in).
  4. Install the trim assembly to the rear compartment panel stowage. Refer to Body Rear Compartment Replacement .
scientia non olet · About LEMON Manuals