LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> XLR Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 4.6L (LH2) - Introduction, Specifications & Repair Instructions >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

    Fig 1: View Of EVAP Canister Access Cover In Right Rear Wheelhouse
    GM561137Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the fuel tank pressure sensor rubber grommet with clean engine oil in order to aid in installation.
  2. Install the fuel tank pressure sensor into the top of the fuel tank.
  3. Connect the fuel tank pressure sensor electrical connector.
  4. Install the EVAP canister access cover.
  5. Install the right rear wheelhouse liner panel. Refer to Rear Wheelhouse Panel Liner Replacement .
scientia non olet · About LEMON Manuals