LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> XLR Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Engine Control System & Fuel System - 3.6L - DTC P0341 To DTC P2099) >> DTC P0451 >> Circuit/System Testing
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Circuit/System Testing

WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel fill cap. Connect the GE-41415-50  to the fuel tank filler neck. Connect the J 41413-200  to the GE-41415-50  . See Special Tools .
  2. Seal the system using the Purge Seal function with a scan tool.
  3. Pressurize the EVAP system with nitrogen to 5 inches H20. Compare the Fuel Tank Pressure Sensor parameter to the J 41413-200  pressure/vacuum gage. See Special Tools . The FTP sensor should be within 1 inch H20 of the pressure/vacuum gage.
    • If the FTP is not within 1 inch H20 of the pressure/vacuum gage, replace the FTP sensor.
  4. Command the vent solenoid valve OPEN with a scan tool.
    • If the FTP sensor parameter is not 0 inch H20, replace the FTP sensor.
scientia non olet · About LEMON Manuals