LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> XLR Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Engine Control System & Fuel System - 3.6L - DTC P0341 To DTC P2099) >> DTC P0455 >> Component Testing
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Component Testing

WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Seal the EVAP system using the EVAP Purge/Seal function with a scan tool.
  2. Pressurize the EVAP system to 5 inches H20.
  3. Compare the Fuel Tank Pressure sensor parameter with a scan tool to the J 41413-200  pressure/vacuum gage. See Special Tools . The scan tool FTP sensor parameter should be within 1 inch H20 of the pressure/vacuum gage.
  4. Command the EVAP vent valve open with a scan tool.
  5. The scan tool Fuel Tank Pressure parameter should be 0 inches H20.
    • If the FTP sensor parameters do not respond to the change in pressure, replace the FTP sensor.
scientia non olet · About LEMON Manuals