LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> XLR V >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 4.4L - Introduction, Specifications & Repair Instructions >> Repair Instructions >> Accelerator Pedal Position Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

CAUTION: Handle the electronic throttle control components carefully. Use cleanliness in order to prevent damage. Do not drop the electronic throttle control components. Do not roughly handle the electronic throttle control components. Do not immerse the electronic throttle control components in cleaning solvents of any type.
  1. Remove the left instrument panel (I/P) on the lower closeout insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
    2. Fig 1: Identifying Accelerator Pedal Sensor Module Electrical Connector
    GM1252542Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector (1) from the accelerator pedal sensor module.
    3. Fig 2: Identifying Accelerator Pedal & Bolts
    GM931700Courtesy of GENERAL MOTORS CORP.
  3. Remove the accelerator pedal mounting bolts (1).
  4. Remove the accelerator pedal (2).
scientia non olet · About LEMON Manuals