LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> XLR V >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 4.4L - Introduction, Specifications & Repair Instructions >> Repair Instructions >> Crankshaft Position Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Crankshaft Position Sensor & Bolt
    GM928205Courtesy of GENERAL MOTORS CORP.
    NOTE: Inspect the crankshaft sensor O-ring for wear or damage. If a problem is found, replace the O-ring.
  1. Lubricate the crankshaft sensor O-ring with clean engine oil.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the crankshaft sensor and the retaining bolt and tighten to 10 N.m (89 lb in).
  3. Connect the crankshaft position sensor electrical connector.
  4. Install the supercharger. Refer to Supercharger Replacement .
  5. Perform the crankshaft position sensor system variation learn procedure. Refer to Crankshaft Position System Variation Learn .
scientia non olet · About LEMON Manuals