LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2010 >> CTS Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 224 (Antilock Brake System With Traction Control System & Stability Control System) >> Diagnostic Information and Procedures >> DTC C0161 >> Circuit/System Testing
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Circuit/System Testing

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, inspect the B22 Brake Pedal Position Sensor for correct installation.
    • If loose or incorrect installation is diagnosed, correct the installation of the component.
  2. Ignition ON, perform the Brake Pedal Position Sensor Calibration and verify the DTC does not reset.
    • If the DTC resets, replace the K17 Electronic Brake Control Module (EBCM).
scientia non olet · About LEMON Manuals