Connecting Rod, Engine

Connecting Rod

Rod caps
Tighten 30 Nm (22 lb ft)
Loosen Zero torque
Re-tighten
First pass 25 Nm (18 lb ft)
Final pass additional 110 degrees

Connecting Rod Bore Diameter - Bearing End 59.620-59.636 mm (2.3472-2.3479 in)
Connecting Rod Bore Diameter - Pin End - Production 24.009-24.019 mm (0.9452-0.9456 in)
Connecting Rod Bore Diameter - Pin End - Service Maximum 24.007 mm (0.9457 in)
Connecting Rod Length - Center to Center 156.05 mm (6.1437 in)
Connecting Rod Side Clearance 0.095-0.355 mm (0.0037-0.0140 in)
Connecting Rod Width - Bearing End
Production 21.775 mm (0.8573 in)
Service 21.725-21.825 mm (0.8553-0.8593 in)
Connecting Rod Width - Pin End
Production 21.775 mm (0.8573 in)
Service 21.725-21.825 mm (0.8553-0.8593 in)