LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2011 >> Escalade Base, RWD >> Repair and Diagnosis >> Steering >> Steering Linkage System >> Repair Instructions >> Relay Rod Replacement >> Removal Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal Procedure

  1. Remove the engine shield, if equipped. Refer to Engine Shield Replacement .
  2. Remove the steering linkage shock absorber from the relay rod, if equipped. Refer to Steering Linkage Shock Absorber Replacement .
  3. Remove the steering linkage outer tie rods. Refer to Steering Linkage Outer Tie Rod Replacement .
    4. Fig 1: Idler Arm & Relay Rod
    GM1862675Courtesy of GENERAL MOTORS CORP.
  4. Remove the idler arm nut (6).

    Discard the nut.

  5. Separate the idler arm (1) from the relay rod (5) using the J 24319-B  Puller.
  6. Remove the pitman arm nut (4).

    Discard the nut.

  7. Separate the pitman arm (2) from the relay rod using the J 24319-B  Puller.
  8. Remove the relay rod from the vehicle.
  9. Inspect the threads and seals on all steering related components. Repair or replace the components as necessary.
scientia non olet · About LEMON Manuals