Endgate Handle Replacement

Fig 1: Endgate Handle Assembly & Bolts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the endgate trim panel. Refer to Endgate Trim Panel Replacement . Remove the endgate spoiler. Refer to Rear Spoiler Replacement (Avalanche/Escalade) .
1	Endgate Handle Bolt (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 25 N.m (18 lb ft)
2	Endgate Handle Assembly Disconnect the actuator rods. Disconnect the electrical connectors.

Callout

Component Name

Preliminary Procedure

Remove the endgate trim panel. Refer to Endgate Trim Panel Replacement .
Remove the endgate spoiler. Refer to Rear Spoiler Replacement (Avalanche/Escalade) .

Endgate Handle Bolt (Qty: 3)

CAUTION:

Tighten
25 N.m (18 lb ft)

Endgate Handle Assembly