LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1869 (Wiring Systems And Power Management - Component Connector End Views - A/C Compressor Through Electronic Power Steering Module X1) >> Component Connector End Views >> Barometric Pressure (BARO) Sensor (LZ1)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Barometric Pressure (BARO) Sensor (LZ1)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Barometric Pressure (BARO) Sensor (LZ1) Connector End View
GM1914850Courtesy of GENERAL MOTORS CORP.
Barometric Pressure (BARO) Sensor (LZ1)

Pin Wire Circuit Function
1 0.8 GY 2704 5-Volt Reference
2 0.8 OG/BK 469 Low Reference
3 0.8 L-GN 432 Barometric Pressure Sensor Signal
Connector Part Information
  • Harness Type: Engine
  • OEM Connector: 13639747
  • Service Connector: 19181248
  • Description: 3-Way F 2.8 Timer Series, Sealed (BK)
Terminal Part Information
  • Terminated Lead: Service by Connector Assembly- 19181248
  • Release Tool: J-38125-36
  • Diagnostic Test Probe: J-35616-35 (VT)
  • Terminal/Tray: 4-964286-1/16
  • Core/Insulation Crimp: E/1